Arduino Weather Station Project - Part 1 ~
by cactus.io
This site - cactus.io - based in Australia. Their goals with this website is to provided projects and tutorials about Arudinos and the wide range of sensors available. They then connect these devices to the internet and display the data for all to see. And they hope it will inspire people anywhere in the world to develop your own projects.
Overview
In this project we are putting together a Weather Station using a variety of sensors. The platform being used is an Arduino board with built in Ethernet. This will provide communications to the sensor along with a power source provided by POE (Power Over Ethernet).
As we work through the project we will connect up the various sensors. In this process we create the software sketch that will run the weather station.
We could also use a WiFi connection to provide the data communications. This would however require an alternative power source such as a solar panel and battery. We will add WIFI at a later stage.
On completion of the project the following data will be available:
- External Temperature (DS18B20)
- Internal Temperature (BME280)
- Humidity (BME280)
- Barometric Pressure (BME280)
- Rain Gauge (Hydreon RG-ll)
- Wind Speed (Davis Anemometer)
- Wind Direction (Davis Anemometer)
Projects
This porjects are very well-noted and so great. If you are interested in how to control many control, how to connect to internet, and how to monitor weather, This project help you so many.
This projects are on developing until now. Currently, This project have posted with part 5.
Learn more
MidnightCow
위즈네트 칩(W5300, W5200, W7100, W7500) 개발자