How to use WIZnet Chip set such as W5100, W5200, W5300, and W5500 with Basic source code

How to use WIZnet Chip set such as W5100, W5200, W5300, and W5500 with Basic source code

by MCS electronics

---

---

Overview

This post introduces how to use WIZnet chip solution such like as W3100A, W5100, W5200, W5300, and W5500 with BASIC source code on BASCOM-AVR & BASCOM-8051.
BASCOM-AVR & BASCOM-8051 are BASIC complier & IDE development tools. These can implement with BASIC source code on WIZnet chip solutions.

CONFIG TCPIP

• Syntax W3100A

  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, TWI=address] [, Clock = speed] [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W3100A] 
  

• Syntax W5100

  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=5100] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] 
  

• Syntax W5200

  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5200] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx] 
  

• Syntax W5300

  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W5300] [,INT=imsg] [,NOUDP=noudp] [align=align] [TXn= tx] [, RXn= rx] [SOCKMEM=sockmem] 
  

• Syntax W5500

  CONFIG TCPIP = NOINT , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5500] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx] 
  

Learn More

Goto Original